Automotive Networking Glossary

Plain-language definitions of the terms used across Multi-Gig Automotive Ethernet, TSN, EMC and in-vehicle architecture.

From 10BASE-T1S to zonal architecture — a quick reference for the vocabulary of in-vehicle networking. Type to search, or pick a letter.

1000BASE-T1Standard
Gigabit Ethernet over a single twisted pair for automotive use, defined in IEEE 802.3bp (2016).
100BASE-T1Standard
100 Mb/s single-pair automotive Ethernet (IEEE 802.3bw), originally known as BroadR-Reach.
10BASE-T1SStandard
10 Mb/s multidrop single-pair Ethernet (IEEE 802.3cg) that lets several nodes share one twisted pair — aimed at replacing CAN and LIN at the network edge.
Asymmetrical EthernetConcept
A link that provides high data rate in one direction (sensor to ECU) and a much lower rate in the other (control, configuration). Ideal for cameras, radar and lidar. Being standardized in IEEE P802.3dm.
AVTPProtocol
Audio Video Transport Protocol (IEEE 1722) — carries time-sensitive audio, video and control streams, including camera formats and CAN/LIN tunnelling, over Ethernet.
BackboneArchitecture
The high-speed links that interconnect zonal controllers and central compute in a zonal architecture, typically 10 Gb/s and above.
ChannelPhysical layer
The complete electrical path between two PHYs: PCB traces, connectors, inline connections and cable. Specified by insertion loss, return loss, crosstalk and mode conversion limits.
CISPR 25EMC
International standard defining limits and methods for measuring radio disturbance from components in vehicles — central to automotive EMC qualification.
DoIPProtocol
Diagnostics over IP (ISO 13400) — vehicle diagnostics and software update communication over Ethernet.
ECUArchitecture
Electronic Control Unit — an embedded computer that controls one or more vehicle functions.
EEEPower
Energy-Efficient Ethernet — low-power idle modes that let links save energy when there is no traffic, applied in automotive PHYs to reduce heat and consumption.
EMCEMC
Electromagnetic Compatibility — the ability of equipment to operate without causing or suffering from electromagnetic interference. Covers emissions and immunity (RF ingress).
EVCArchitecture
Electronic Vehicle Computer — a central, high-performance compute platform that consolidates many functions previously spread across ECUs.
gPTPTSN
Generalized Precision Time Protocol (IEEE 802.1AS) — synchronizes clocks across the network to sub-microsecond precision for sensor fusion and scheduled traffic.
IEEE 802.3chStandard
Multi-Gig automotive Ethernet PHYs: 2.5GBASE-T1, 5GBASE-T1 and 10GBASE-T1 over a single shielded differential pair (approved 2020).
IEEE 802.3cyStandard
Greater-than-10 Gb/s electrical automotive Ethernet — 25GBASE-T1, 50GBASE-T1 and 100GBASE-T1 PHYs (approved 2023).
IEEE 802.3czStandard
Multi-gigabit optical automotive Ethernet (2.5 to 50 Gb/s) over multimode glass fibre.
Insertion lossPhysical layer
Signal attenuation along a channel versus frequency. Higher data rates use higher frequencies and therefore face more loss per metre.
MACsecSecurity
IEEE 802.1AE link-layer security providing authentication, integrity and optional encryption of every Ethernet frame between two nodes.
MDIPhysical layer
Medium Dependent Interface — the connector interface between the PHY circuitry and the cable.
Multi-GigConcept
Ethernet speeds above 1 Gb/s (2.5, 5, 10, 25, 50 Gb/s and beyond) — the focus of the NAV Alliance.
OEMIndustry
Original Equipment Manufacturer — in automotive, the vehicle manufacturer.
PAM4Physical layer
Four-level pulse amplitude modulation — transmits two bits per symbol, halving the symbol rate compared with two-level signalling.
PHYPhysical layer
The physical-layer transceiver that converts digital frames into electrical (or optical) signals on the channel and back.
PlugfestTesting
An event where vendors connect their products to check interoperability against each other under a common test plan.
PoDLPower
Power over Data Lines (IEEE 802.3bu) — delivers DC power over the same single twisted pair that carries data, saving wires and weight.
Return lossPhysical layer
A measure of signal reflected back toward the transmitter by impedance discontinuities such as connectors.
RF ingressEMC
Unwanted radio-frequency energy coupling into a cable or channel, which the receiver must tolerate without errors.
SDVArchitecture
Software-Defined Vehicle — a vehicle whose features are primarily defined and updated through software running on centralized compute.
SerDesPhysical layer
Serializer/deserializer — point-to-point links commonly used for cameras and displays; Asymmetrical Ethernet brings Ethernet to the same use cases.
SOME/IPProtocol
Scalable service-Oriented MiddlewarE over IP — the service-oriented communication protocol widely used in automotive Ethernet networks.
SQIDiagnostics
Signal Quality Indicator — a PHY metric that reports link margin, enabling predictive maintenance before a link fails.
TC10Power
OPEN Alliance specification for sleep and wake-up over automotive Ethernet links, so ECUs can power down and wake on network activity.
TDRDiagnostics
Time-Domain Reflectometry — locating opens, shorts or damage along a cable by measuring reflections; many automotive PHYs embed it for cable diagnostics.
TSNTSN
Time-Sensitive Networking — the IEEE 802.1 family (802.1AS, Qbv, Qci, CB and others) that brings deterministic latency and reliability to Ethernet.
Zonal architectureArchitecture
An E/E architecture in which zone controllers aggregate local sensors and actuators by physical location and connect to central compute over an Ethernet backbone.

Missing a term? Tell us and we will add it. For deeper explanations, read our technical articles.