Asymmetrical Ethernet for Sensors

The NAV Alliance is promoting Asymmetrical Ethernet for the sensor interface — high-speed uplink for cameras, efficient downlink, and Energy-Efficient Ethernet.

The NAV Alliance is promoting Asymmetrical Ethernet for the sensor interface. Smart Car and Data Center-on-wheels are just some of the terms being used to define the exciting new waves of technology transforming the automotive industry and promising safer, greener self-driving cars and enhanced user experiences.

Cameras, radar and lidar are the eyes of the autonomous vehicle. Their traffic is fundamentally one-directional: a camera sends several gigabits per second of image data towards the central computer, while the computer sends back only a few megabits per second of configuration, control and synchronization messages. A conventional symmetric Ethernet link spends the same effort — and power — in both directions. Asymmetrical Ethernet matches the physical layer to the real traffic pattern.

What makes an Ethernet link asymmetrical?

  • High-speed uplink: Multi-Gig data rate from the sensor to the ECU or zonal controller, sized for uncompressed or lightly compressed high-resolution video.
  • Low-speed downlink: a much lower data rate back to the sensor for register access, triggers, time synchronization and firmware updates — enough for control, with far less transmitter power and complexity at the camera end.
  • Ethernet end-to-end: camera data enters the same switched, secured and managed Ethernet network as the rest of the vehicle, instead of a separate proprietary point-to-point SerDes link.
  • Energy-Efficient Ethernet (EEE): low-power idle modes let the link save energy between frames and when a sensor is inactive, reducing heat in compact camera housings.

Why it matters for vehicle architectures

Using Ethernet for sensors removes the need for dedicated serializer/deserializer chipsets and their protocol bridges in every ECU. Camera streams can be switched to multiple consumers, replicated for redundancy, time-stamped with gPTP, protected with MACsec and diagnosed with the same tools as the rest of the network. That is exactly the “Ethernet camera bridge” approach for software-defined vehicles that NAV Alliance members have presented, and it is the subject of the IEEE P802.3dm Asymmetrical Electrical Automotive Ethernet project.

Close-up of camera, radar and lidar sensor pod on an autonomous test vehicle
Photo: 9yz / Wikimedia Commons, CC BY 4.0

Further reading

Blog: Ethernet Camera Bridge for Software-Defined VehiclesBy Amir Bar-Niv, VP of Marketing, Automotive Business Unit, Marvell. For additional information, please contact our member companies.